LGT – Cheap Lightsaber with 9 Sound Fonts and Infinite Color Changing

Description

After-sales service: We offer a one-year guarantee.
If there any problems, please feel free to contact with us.
The information about 4 Sound Fonts
USERGUIDE
To wake the lightsaber:
Hold down power button for 1 seconds. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode.
Awake mode operation:
Pressing the power button will turn the blade on and activate sounds and effects.
When the blade is lit, the power button operates thusly:
– Tap – blaster deflection
– Hold 0.5 second,button LED flash 1 time, then release – saber lock-up
-Hold 1 seconds,button LED flash 2 times,then release to cycle rainbow blade colors. Once a desired color is reached, tap it to set the color.
-Hold 1.5 seconds,button LED flash 3 times,then release to cycle solid blade colors. Once a desired color is reached, tap it to set the color.
– Hold 2 seconds powers off the blade.Button LED flash 4 times.
– Holding the power button down for 0.5 seconds,button LED flash 1 time, while the blade is off, but still in wake mode,let go of the button will select sound volume.
– Holding the power button down for 1 seconds,button LED flash 2 time, while the blade is off, but still in wake mode,will select a new light effects(stable, unstable, and pulse available).
– Holding the power button down for 1.5 seconds, button LED flash 3 time, while the blade is off, but still in wake mode,will select a new sound fonts.
– Holding 10 seconds to make the saber sleep. If the saber sits idle for 10 minutes it will also enter deep sleep again.
Sleep mode operation:
When the saber is in deep sleep there will be no lights or sounds to keep power for long time
Trouble Shooting
Issue 1 – Saber has no sound
Saber may be in mute mode. Turn off the saber, then hold the button for 0.5 seconds to change sound
volume.
Issue 2 – Saber loses either red, blue or green color does not light up at all, or has no swing or clash sounds
Charge the battery for one hour, as this is likely a low battery issue. Removing and reinstalling the battery may fix it if the issue is not related to charge.
Issue 3 – When charging, saber cues ‘charging’ then immediately indicated ‘ready’
The battery is not making contact properly with the plates inside. Open the saber and carefully adjust the connectors so that the positive and negative both touch easily.
Issue 4 – If any other problem occurs that the above methods won’t fix
Please contact our customer service team.